Ok I am lost ... so i bought this box right
#1
Ok I am lost ... so i bought this box right
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5721164964
and the guys lists..
now is it 2 cubic feet each subwoofer section since the box is divided in two? or is it 1.25 cubic feet each opening.. someone help me out
my screwed up math says 15 x 15 x 15 = 45" / 30 because 30 inches = 1 foot is 1.5
and the guys lists..
Made of thick 3/4" MDF wood
Dark Grey carpeted exterior
Two holes for 12" speakers
Two connection terminals
Dimensions: 30.5" width x 15" depth x 15" height
2.00 cubic feet in the sealed section
1.25 cubic feet per sealed sections
Total of 4.50 cubic feet!
Dark Grey carpeted exterior
Two holes for 12" speakers
Two connection terminals
Dimensions: 30.5" width x 15" depth x 15" height
2.00 cubic feet in the sealed section
1.25 cubic feet per sealed sections
Total of 4.50 cubic feet!
my screwed up math says 15 x 15 x 15 = 45" / 30 because 30 inches = 1 foot is 1.5
#2
wtf, "2.0 in the sealed section...1.25 per sealed section" ??
If those box measurements are right, total internal volume should be around 3.06 cu ft. So each chamber is around 1.5 cu ft. I dont know where he got 2.0 per chamber from
If those box measurements are right, total internal volume should be around 3.06 cu ft. So each chamber is around 1.5 cu ft. I dont know where he got 2.0 per chamber from
#3
yeah he lost me on that.. the way i came with 1.5.. i figure since the full width is 30 .. half would be 15... depth 15... height 15 .. total for 1 side is 45 inches.. which is 1.5 feet .. give or take
#4
The way i did it was 29 x 13.5 x 13.5 = 5285.25 (i took the thickness of the wood into consideration). I then divided that by 1728 to get 3.058 for a total volume. Then half that is around 1.5 give or take
#6
I tend to get a bit irritable
iTrader: (151)
Join Date: Feb 2002
Location: Central Jersey
Posts: 17,674
Originally Posted by Fosgate Fan
The way i did it was 29 x 13.5 x 13.5 = 5285.25 (i took the thickness of the wood into consideration). I then divided that by 1728 to get 3.058 for a total volume. Then half that is around 1.5 give or take
Doug..I told ya I woulda built ya one. And terminals Suck
#8
Originally Posted by Pearl96Max
Why 29? If full width is 30..then it should be 27.75....the rest would depend on how it was built with the sides and top locations
I just did 30.5 - 1.5 = 29. Or am i wrong?
#11
Originally Posted by Pearl96Max
Why 29? If full width is 30..then it should be 27.75....the rest would depend on how it was built with the sides and top locations..
Doug..I told ya I woulda built ya one. And terminals Suck
Doug..I told ya I woulda built ya one. And terminals Suck
#16
have don build ya one, or get his one for sale, it still up for sale don? those should be pretty good, but yea ditch the prefab and either build your own or have don build u one. he sent me the cut sheet for mine which helped a ton. thanks again don. wanna send me a D51200.1?
Thread
Thread Starter
Forum
Replies
Last Post
Violator
4th Generation Classifieds (1995-1999)
1
09-09-2015 10:14 AM
lowpost99
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
1
09-08-2015 05:06 AM