All Motor All Motor Advanced Performance. Talk about Engine Swaps, Internal Engine work. Not your basic Y pipe and Intake Information.

A/F ratio at Idle?

Thread Tools
 
Search this Thread
 
Old 05-02-2006, 07:54 AM
  #1  
The Definitive AE Master
Thread Starter
iTrader: (10)
 
Larrio's Avatar
 
Join Date: Dec 2001
Posts: 5,670
A/F ratio at Idle?

I'm not sure if I imagined this, but IIRC my zeitronix read-out used to be 14.7 A/F when the car was idling. It would fluctuate up and down but would always stabilize. But the unit was always half-way covered and after awhile I stopped paying attention

However now that i've relocated the zeitronix unit to a more noticeable location, the screen reading shows that the car idles at 14.0 A/F and fluctuates around that point. At WOT, the A/F is incrementally lower also. In the past, 3rd gear at 7000 rpm was 12.2 A/F and now it is 11.8 A/F

At first I thought it might be the LCD screen, but I plugged the zeitronix unit directly to the labtop and it shows the same readings.

Can anyone with a WB02 confirm their A/F readings at idle? I was thinking that the ECU should automatically adjust for temperature changes.
Larrio is offline  
Old 05-02-2006, 08:20 AM
  #2  
Supporting Maxima.org Member
iTrader: (11)
 
SonicDust187's Avatar
 
Join Date: Jan 2002
Location: Brooklyn, NY
Posts: 3,951
At idle it should be 14.7.
SonicDust187 is offline  
Old 05-02-2006, 08:44 AM
  #3  
Supporting Maxima.org Member
iTrader: (3)
 
eng92's Avatar
 
Join Date: Oct 2002
Location: Ontario, Canada
Posts: 1,204
At idle and anytime you are in closed loop, the AFR reading should oscillate around 14.7.

Does the zeitronix unit have auto-calibration for temperature, altitude, etc. ?
eng92 is offline  
Old 05-02-2006, 09:03 AM
  #4  
Senior Member
 
virgilio7's Avatar
 
Join Date: Nov 2005
Posts: 165
a calibration is needed.
virgilio7 is offline  
Old 05-02-2006, 09:50 AM
  #5  
The Definitive AE Master
Thread Starter
iTrader: (10)
 
Larrio's Avatar
 
Join Date: Dec 2001
Posts: 5,670
No, the zeitronix doesn't have auto-calibration. They told me to send back the unit, lcd, and o2 sensor for testing. That is going to be a pain un-installing everything.

I'm wondering if the wbo2 went bad or if something is wrong with the ECU
Larrio is offline  
Old 05-02-2006, 10:42 AM
  #6  
Need A Light?
iTrader: (28)
 
steven88's Avatar
 
Join Date: Jan 2003
Location: SoCal, CA
Posts: 8,649
mine hangs around 14.7 at idle....where did you place your wb o2? mine is in the test pipe
steven88 is offline  
Old 05-02-2006, 12:11 PM
  #7  
IMBOUTTOBUSTSOMEGHOSTS
iTrader: (8)
 
sloppymax's Avatar
 
Join Date: Jul 2001
Location: Charlotte, NC
Posts: 4,695
mine settles typically between 14.7-14.8 at idle after its warmed up. even though it may not have stuck, i have 8% fuel taken out at idle and up to 11% during partial throttle. i can see that return being a pain but definetely worth getting figured out.
sloppymax is offline  
Old 05-02-2006, 03:02 PM
  #8  
Need A Light?
iTrader: (28)
 
steven88's Avatar
 
Join Date: Jan 2003
Location: SoCal, CA
Posts: 8,649
Originally Posted by sloppymax
mine settles typically between 14.7-14.8 at idle after its warmed up. even though it may not have stuck, i have 8% fuel taken out at idle and up to 11% during partial throttle. i can see that return being a pain but definetely worth getting figured out.
i thought changing the part throttle settings won't do any good?
steven88 is offline  
Old 05-02-2006, 05:51 PM
  #9  
IMBOUTTOBUSTSOMEGHOSTS
iTrader: (8)
 
sloppymax's Avatar
 
Join Date: Jul 2001
Location: Charlotte, NC
Posts: 4,695
Originally Posted by steven88
i thought changing the part throttle settings won't do any good?
it will typically revert back but i left the settings and it is not doing any harm.
sloppymax is offline  
Old 05-02-2006, 05:58 PM
  #10  
Need A Light?
iTrader: (28)
 
steven88's Avatar
 
Join Date: Jan 2003
Location: SoCal, CA
Posts: 8,649
Originally Posted by sloppymax
it will typically revert back but i left the settings and it is not doing any harm.
so what afr are you at with the current -8%?

and when you say "typically"...out of how many times will it go back...and how many times it won't?
steven88 is offline  
Old 05-02-2006, 09:49 PM
  #11  
Made in Taiwan
iTrader: (10)
 
GodFather's Avatar
 
Join Date: Jun 2004
Location: Houston, TX
Posts: 1,732
hahaha, members from the chinese thread. Da(4) Jia(0) Hao(2)...
GodFather is offline  
Old 05-03-2006, 05:17 AM
  #12  
IMBOUTTOBUSTSOMEGHOSTS
iTrader: (8)
 
sloppymax's Avatar
 
Join Date: Jul 2001
Location: Charlotte, NC
Posts: 4,695
Originally Posted by steven88
so what afr are you at with the current -8%?

and when you say "typically"...out of how many times will it go back...and how many times it won't?
at 8% removed i see 14.7-14.8 at idle.
sloppymax is offline  
Old 05-03-2006, 07:48 AM
  #13  
The Definitive AE Master
Thread Starter
iTrader: (10)
 
Larrio's Avatar
 
Join Date: Dec 2001
Posts: 5,670
I have it right before the cat. It worked fine as long as I can remember. But for some reason now its only 14.7-14.8 cold start and then keeps dropping down to 13.8-14.0 warmed up.

Its annoying because WOT is reading pig rich, I datalogged 11.5 A/F ratio this morning. Zeitronix told me to pull the whole unit and send it back for testing. Thats going to be a big pain
Larrio is offline  
Old 05-03-2006, 07:56 AM
  #14  
Need A Light?
iTrader: (28)
 
steven88's Avatar
 
Join Date: Jan 2003
Location: SoCal, CA
Posts: 8,649
Originally Posted by sloppymax
at 8% removed i see 14.7-14.8 at idle.
then what are you running if you put it back to 0%?
steven88 is offline  
Old 05-04-2006, 07:30 AM
  #15  
Senior Member
 
virgilio7's Avatar
 
Join Date: Nov 2005
Posts: 165
have you checked your stock sensors? the wideband is problably reading right and your stock sensors are bad. then the car is going to adjust no matter what you do.
virgilio7 is offline  
Old 05-04-2006, 08:20 AM
  #16  
The Definitive AE Master
Thread Starter
iTrader: (10)
 
Larrio's Avatar
 
Join Date: Dec 2001
Posts: 5,670
I used the OBD-II scanners, the car has no codes. The voltage and fuel trim "look" okay for the primary o2's (although i'm not sure how I can tell they went bad).

I purchased a new bosch wideband o2 to see if the sensor went bad. My gas mileage has been around 26.3 mpg, so I ruled out the o2 sensors going bad
Larrio is offline  
Old 05-04-2006, 09:06 AM
  #17  
IMBOUTTOBUSTSOMEGHOSTS
iTrader: (8)
 
sloppymax's Avatar
 
Join Date: Jul 2001
Location: Charlotte, NC
Posts: 4,695
Originally Posted by steven88
then what are you running if you put it back to 0%?
i havent neutraled it out yet. i just used my harrison software and vafc2 to get my short term fuel trims as close to 0 as possible.
sloppymax is offline  
Old 05-08-2006, 07:46 AM
  #18  
The Definitive AE Master
Thread Starter
iTrader: (10)
 
Larrio's Avatar
 
Join Date: Dec 2001
Posts: 5,670
I must have used a bad batch of gas (or accidentally filled up on 87 octane).

The idle A/F is back to 14.7

I had to fill up the last two times previously at a no-name gas station during a business trip.
Larrio is offline  
Old 05-10-2006, 07:18 AM
  #19  
drag racing is for wussies
iTrader: (15)
 
BlackBIRDVQ's Avatar
 
Join Date: Nov 2002
Posts: 6,023
I notice a diff when a gas station is trying to pull off a scam selling 87 as 93 octane. My AF hangs around 14-14.2 on the cheap stuff and runs in the mid 12s under WOT. With 93 my car idles around 14.8-15.0 A/F. Under WOT I see 13.6:1 . I use PLX M300 that I've had for over a year, 155k mile Original 02 sensors also.
BlackBIRDVQ is offline  
Old 05-10-2006, 10:56 PM
  #20  
Senior Member
iTrader: (7)
 
2002AltimateV6's Avatar
 
Join Date: Aug 2005
Location: Tacoma, WA
Posts: 547
I idle at around 14.5-14.9:1 and at WOT, 13.5-14.3:1, but this after tuning.
2002AltimateV6 is offline  
Old 05-11-2006, 11:07 AM
  #21  
The Definitive AE Master
Thread Starter
iTrader: (10)
 
Larrio's Avatar
 
Join Date: Dec 2001
Posts: 5,670
Originally Posted by BlackBIRDVQ
I notice a diff when a gas station is trying to pull off a scam selling 87 as 93 octane. My AF hangs around 14-14.2 on the cheap stuff and runs in the mid 12s under WOT. With 93 my car idles around 14.8-15.0 A/F. Under WOT I see 13.6:1 . I use PLX M300 that I've had for over a year, 155k mile Original 02 sensors also.
Hmm... interesting. I don't have a probably usually because I only use Chevron gas. However when the A/F incident occured I had to fill up a few gallons because I was lost during a business trip.

My a/f under WOT was into the 11's at the time
Larrio is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TKHanson
5th Generation Maxima (2000-2003)
6
11-24-2018 01:39 AM
Unclejunebug
5th Generation Maxima (2000-2003)
10
04-02-2016 05:42 AM
salty318
7th Generation Maxima (2009-2015)
7
09-29-2015 01:21 PM
salty318
7th Generation Maxima (2009-2015)
1
09-28-2015 07:22 PM



Quick Reply: A/F ratio at Idle?



All times are GMT -7. The time now is 05:47 PM.