5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

2001 AE rusted b pipe, need suggestions

Thread Tools
 
Search this Thread
 
Old 12-31-2013, 05:22 PM
  #1  
Member
Thread Starter
 
Domf3's Avatar
 
Join Date: Nov 2006
Posts: 219
2001 AE rusted b pipe, need suggestions

The pipe above the rear axle, going into the muffler (B-pipe?) rusted through a couple years ago. I had an exhaust shop cut out the rust and weld in a piece of pipe (about 4 inches). It lasted a couple years before the welds on the replacement pipe rusted through.

The rest of the exhaust looks OK (resonator and AE muffler are good) except for that small section of pipe. I'd like to keep the car sounding quiet. My friend suggested purchasing the SRS cat back exhaust, but I'm sure that would be louder than stock. I thought about having the exhaust shop cut out the pipe again and weld another section in, but not sure that would last very long? Is there a better alternative?

I'd like to stay under $300 for the project, not including labor. At 140k miles I'm not looking to spend too much. I read the bosal is a quiet replacement option? Any other ideas?

Last edited by Domf3; 12-31-2013 at 05:27 PM.
Domf3 is offline  
Old 12-31-2013, 05:36 PM
  #2  
Senior Member
 
Donkeypunch's Avatar
 
Join Date: Dec 2005
Posts: 1,215
Doesn't painting the welded section prevent rust?
Donkeypunch is offline  
Old 12-31-2013, 08:21 PM
  #3  
Senior Member
iTrader: (1)
 
george__'s Avatar
 
Join Date: Jan 2013
Location: Earth
Posts: 4,227
if you don't care about what type of bend the b-pipe uses a exhaust shop can probably fix your b-pipe for under $300.00
george__ is offline  
Old 01-01-2014, 01:07 AM
  #4  
RR5
Senior Member
iTrader: (6)
 
RR5's Avatar
 
Join Date: Sep 2005
Location: Bellevue, WA
Posts: 1,721
Rustreformer. If you paint over rust, damage can still occur. Or just hit car-part.com and pickup a cheap replacement.

Looks as if that pipe is part of the muffler? Check below
http://www.courtesyparts.com/-c-1956...1981_1982.html

Also check on rockauto.com

Last edited by RR5; 01-01-2014 at 01:10 AM.
RR5 is offline  
Old 01-01-2014, 07:46 AM
  #5  
Member
 
TriniSpeC's Avatar
 
Join Date: Jun 2013
Posts: 164
I wanna make a custom b pipe. The over the axle design is so restrictive.
TriniSpeC is offline  
Old 01-01-2014, 10:23 AM
  #6  
Member
Thread Starter
 
Domf3's Avatar
 
Join Date: Nov 2006
Posts: 219
Can anybody confirm if the Bosal muffler (axle back) will fit an anniversary edition? I pulled this up on rockauto:

BOSAL Part # 278025 Rear silencer One of our most popular parts
Exc. Anniversary Edition; Note: Muffler does not have OEM valve in tail pipe.

Do the pipes line up? Are the tips a problem?
Domf3 is offline  
Old 01-01-2014, 10:27 AM
  #7  
Senior Member
 
T_Behr904's Avatar
 
Join Date: Sep 2010
Location: Jacksonville, FL
Posts: 10,349
If your muffler is still fine, keep it and replace the rest. I had a similar situation. I had my pipe replaced from the front of where the resonator starts back to the factory muffler, deleting the resonator in the process. It gives it a nice subtle tone without being aftermarket ricey loud.
T_Behr904 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
shilov
4th Generation Maxima (1995-1999)
13
02-19-2024 09:40 PM
pears
5th Generation Maxima (2000-2003)
15
09-18-2015 05:25 AM
QueensMAX
5th Generation Maxima (2000-2003)
7
09-15-2015 04:14 AM
mikebla
General Maxima Discussion
0
09-03-2015 05:37 PM



Quick Reply: 2001 AE rusted b pipe, need suggestions



All times are GMT -7. The time now is 05:37 PM.