How you like me now!
#82
Doing the grill like mine isn't super hard if you have time and are handy. That being said you can buy a cf grill just like it online and then have it painted. Much easier and that is the route I would do if I had to do it again. The grill wasn't available when I did mine.
http://www.ecrater.com/p/8681292/nis...ber-mesh?gps=1
I have seen them as cheap as $100 plus another $100 for a two color(font body color, rear black) spray at a body shop. Much easier and if you don't do a good job with the bondo you will get cracks.
And take the cmod with a grain of salt, it won't fit that well and look as good as F&F or mine or others who actually hand built theirs from oem grilles.
#83
ditto never was available when I did mine. It's a lot of work though and believe him when he says you will get cracks if you don't do it well.
And take the cmod with a grain of salt, it won't fit that well and look as good as F&F or mine or others who actually hand built theirs from oem grilles.
And take the cmod with a grain of salt, it won't fit that well and look as good as F&F or mine or others who actually hand built theirs from oem grilles.
Last edited by NmexMAX; 01-17-2013 at 12:44 PM.
#86
So obviously the "veerrrrry" ment I was drunk on tequila, and... that argument really isn't going anywhere except that I was drunk, I know its a tsx, but it should be called "THE TSEX!"
#87
i just bought some g35 rays rims with tires they have a machined lip and powder coated never seen any rays like this in my life
Last edited by NmexMAX; 01-17-2013 at 12:44 PM.
#90
#91
i dont believe i have one i had my uncle who is a mechanic and a construction worker take it off i was drillin holes and **** for freakin 5 hours he took it off in literally 5 minutes i just didnt have the tools and knowledge of rust and strip bolts plus pb blaster, wd40 and freeze off did not help at all the rims are going on tommorow we a new set of wheel locks and a extra gorilla lug nut reverse bolt shiit on
#93
yea it was just way to much i was soo annoyed i actually took a hammer and smacked it as hard as i could and it didnt come off...... i actually ripped off my eye lids today and i like it without it. but now i want to do something to it that makes it look meaner besides the rims... like a custom lip i want somethign no one else has but id settle for a stillen lol
#94
yea it was just way to much i was soo annoyed i actually took a hammer and smacked it as hard as i could and it didnt come off...... i actually ripped off my eye lids today and i like it without it. but now i want to do something to it that makes it look meaner besides the rims... like a custom lip i want somethign no one else has but id settle for a stillen lol
#95
i think they use too ? sounds familiar maybe i can do a stillen lip and get it carbon fiber wrapped idk but once my rims up on the car a car wash and pictures will be on the way. and you guys making fun of me for buying a maxima with body kit and all. i just found out today his audi now has 490 horsepower so yea eat his dustttt lol
#96
i was so anxious to get some pics for you guys so i hopped into my garage with the pjs and camera a lil tour of my cluttered garage
first i would like to introduce my old way of transportation the biitches loved me cause i was ballin the bikes lmaooo jk
some nissan love for you foos
nice n low with a extra set of tires
my extra set of maxima 05 rims with a lonely axis mod tryna fit in lol
my new g35 rays rims powder coated and machined lip pretty sure the only in the country. try to hate on me now!!! lol
ima still keep it!!! ima do a home repair and let it chill. even tho i dont like body kits i dont think it deserves to be junked unlike you other guys
O forgot to say i didnt always like fat azz eye lids my old 5th gen beat down to the bones also my first car
Nitto Invos/machine lip/powder coat
and lastly a F U to my haters jk i dont mind the constructive criticism
first i would like to introduce my old way of transportation the biitches loved me cause i was ballin the bikes lmaooo jk
some nissan love for you foos
nice n low with a extra set of tires
my extra set of maxima 05 rims with a lonely axis mod tryna fit in lol
my new g35 rays rims powder coated and machined lip pretty sure the only in the country. try to hate on me now!!! lol
ima still keep it!!! ima do a home repair and let it chill. even tho i dont like body kits i dont think it deserves to be junked unlike you other guys
O forgot to say i didnt always like fat azz eye lids my old 5th gen beat down to the bones also my first car
Nitto Invos/machine lip/powder coat
and lastly a F U to my haters jk i dont mind the constructive criticism
Last edited by MaxFiyah; 01-17-2013 at 09:34 PM.
#100
OP, Good call on the OEM hood. Sorry, but if no hood pins, it will fly off at some point. The OEM latch is not that strong. I've seen it happen to fellow owners at low speeds.
*than
**Revere
***you're
**Revere
***you're
#102
#105
#106
Fender rolling isn't all that expensive as much as it is risky-ish, if some tool doesn't have the right sh*t or the right experience they can **** up your fenders.
#107
oooo that sucks im probably just gonna raise it a lil its touching my fenders on the back and when there is the slightest groove it rubs and my boys were in the car yesterday 4 of them they got in i told the lightest one to sit behind me where it rubs the most and once i moved it was already rubbing like **** i was like i know its gayy but you gonna have to lean onto the other dude lmao cause this is my car we talking about and i had to go back home to get my tsx cause i didnt feel comfortable with all that rubbing ima take pics tho
#109
#114
thanks they werent supposedly hating on mine but on my boy for no reason they did hate on my body kit, fat eyelids, boost guages ect but when i was buying a maxima i bought this one cause it had alot of mods on it and in my mind i wanted a maxima with stock bumper + stillen lip + eyelids i ripped off my eyelids cause i started to dislike it also cause i did the eyelids 2 am in the morning for fun i even dipped a evo style front on my body kit and left it on for a week lol..... idk if i want a stillen lip anymore cause everyone has it but if i do ima paint it neon green or some **** like that for fun lol. plus im pretty sure the ones who hate on me have a slower maxima -___-
#115
Did you bend/cut the fender to bumper lip? That's where they rub first, not on the top section.
I'm talking about the rear here, though. Have a peek at where the bumper meets the fender you will see the 90* edge I'm talking about, you can just cut or bend it out of hte way with no adverse effects
I'm talking about the rear here, though. Have a peek at where the bumper meets the fender you will see the 90* edge I'm talking about, you can just cut or bend it out of hte way with no adverse effects
#116
Did you bend/cut the fender to bumper lip? That's where they rub first, not on the top section.
I'm talking about the rear here, though. Have a peek at where the bumper meets the fender you will see the 90* edge I'm talking about, you can just cut or bend it out of hte way with no adverse effects
I'm talking about the rear here, though. Have a peek at where the bumper meets the fender you will see the 90* edge I'm talking about, you can just cut or bend it out of hte way with no adverse effects
#119
lol thanks
yea its not stock its SSBC big brake kit its really nice i dont feel any vibration braking from high speed to low speeds very fast
yea its not stock its SSBC big brake kit its really nice i dont feel any vibration braking from high speed to low speeds very fast