question about aftermarket ebay hids?
#1
question about aftermarket ebay hids?
Everyone knows that there are those aftermarket HID's that you can find on ebay for like 500-600 bucks. here is a link of them:
http://cgi.ebay.com/ebaymotors/2002-...47113461QQrdZ1
If i was to put these on my 01 would then leave that nasty gap betweeen the bumper and the bottom of the headlight. Ive seen these on 02 and that gap would bother the hell out of me.
Just wondering if the same thing would happen if i tried them on an 01.
thanks for the input
http://cgi.ebay.com/ebaymotors/2002-...47113461QQrdZ1
If i was to put these on my 01 would then leave that nasty gap betweeen the bumper and the bottom of the headlight. Ive seen these on 02 and that gap would bother the hell out of me.
Just wondering if the same thing would happen if i tried them on an 01.
thanks for the input
#4
However, if you install them without the bottom clips they will shake right? On old ****ty cars its annoying enough having halogens shake, god forbid HID's.
Heres what I did, I just got a Philips G4 Slim ballast kit off of ebay and put them in my stock housing. They look great, just make sure you aim them a bit lower than stock height. If you really want to look nice for the price, get a pair of AE headlights and put HID in them...
Heres what I did, I just got a Philips G4 Slim ballast kit off of ebay and put them in my stock housing. They look great, just make sure you aim them a bit lower than stock height. If you really want to look nice for the price, get a pair of AE headlights and put HID in them...
#5
No, the HID's fit perfectly flush on the '00-'01's. There is no gap if you use the '02-'03 clips. It's the halogens that leave the nasty gap if you were to install them on the '02-'03 bumpers. Check my hompage for pics.
#6
Supporting Maxima.org Member
iTrader: (8)
Join Date: Dec 2005
Location: Atlantic City, NJ
Posts: 606
DON'T DO IT......
I have one OEM HID and one ebay knockoff, and there are enough noticable differences to say don't buy one;
-the fitment is off due to the HID bulb cover being larger
-it uses different plugs that get in the way when you are trying to make it sit right on your bumper.
-the high beam bulb seating was just designed awful, you can barely connect the plug to the bulb.
-and the worst part is the actual HID bulb sits in the housing crooked, so the reflected beam is off.
Now maybe I just got a defect, but I must say, that after putting one New OEM HID and one New eBay HID on my 2k at the same time, I really wish i had bought two OEM.
I have one OEM HID and one ebay knockoff, and there are enough noticable differences to say don't buy one;
-the fitment is off due to the HID bulb cover being larger
-it uses different plugs that get in the way when you are trying to make it sit right on your bumper.
-the high beam bulb seating was just designed awful, you can barely connect the plug to the bulb.
-and the worst part is the actual HID bulb sits in the housing crooked, so the reflected beam is off.
Now maybe I just got a defect, but I must say, that after putting one New OEM HID and one New eBay HID on my 2k at the same time, I really wish i had bought two OEM.
#8
So then if i got legit HID's and not ebay aftermarket HIDs' would that resolve the Gap issue, or is that gap just going to be there regardless if the HID's are Factory or Ebay?
I would do the AE mod to my headlights and put in HID's but i heard that the 01 housing doesnt give good output if you install HID's in them..( i could be wrong). if i could go the route of AE'ing my headlights and putting in a HID kit in them then i might go that route.
I would do the AE mod to my headlights and put in HID's but i heard that the 01 housing doesnt give good output if you install HID's in them..( i could be wrong). if i could go the route of AE'ing my headlights and putting in a HID kit in them then i might go that route.
#9
Originally Posted by 2001semax
So then if i got legit HID's and not ebay aftermarket HIDs' would that resolve the Gap issue, or is that gap just going to be there regardless if the HID's are Factory or Ebay?
I would do the AE mod to my headlights and put in HID's but i heard that the 01 housing doesnt give good output if you install HID's in them..( i could be wrong). if i could go the route of AE'ing my headlights and putting in a HID kit in them then i might go that route.
I would do the AE mod to my headlights and put in HID's but i heard that the 01 housing doesnt give good output if you install HID's in them..( i could be wrong). if i could go the route of AE'ing my headlights and putting in a HID kit in them then i might go that route.
#10
Supporting Maxima.org Member
iTrader: (8)
Join Date: Dec 2005
Location: Atlantic City, NJ
Posts: 606
Originally Posted by MIXXMAX
OEM's are always better than aftermarket. Again, the OEM HID's sit perfectly in the '00-'01 bumpers....NO GAP! I'm not sure about the aftermarket ones. They are not OEM's, that is why you get what you pay for. As far as the HID's retrofitted in the halogens, plenty of people did here on the Org. Ask around, I'm sure someone will help. But, IMHO, the '02-'03 HID's are far more the better route. You'll be glad once you have them. Good Luck!
And previously I had the 2k headlights fitted with HID's ( was a PITA always something going wrong, blown ballast, bulb fitment, grounding issues)
#12
i say you should get the angel eye head lights from ebay wit the projectors, go on to HIDPlanet.com and order their ballast and projectors and retro that bad boy, I'm hoping to do that myself over the summer, when i have more money =(
#14
Originally Posted by xlcrew
here's a few pics of my OEM 02 lights in my 2k max. i took out the clips and they sit flush with no bouncing at all. here you go.
#16
Originally Posted by Ride2kMax
Guys when you put those headlights in to your 2k/2k1 what modifications do you do you the wire harness. Is it just a 02 harness and plug and play?
It's NOT plug and play. You have to completely rewire it with 02-03 harnesses.
#17
Originally Posted by scmaxima2k
It's NOT plug and play. You have to completely rewire it with 02-03 harnesses.
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
09-02-2021 11:03 AM
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM