RI FS: BNIB "Shorty Headers & Y-Pipe"
#1
FS: BNIB "Shorty Headers & Y-Pipe"
For Sale; Brand New In The Box "Shorty Headers & Y-Pipe" (gaskets and hdw.).
Fits 1995-2001 / VQ30DE-VQ30DE-K / 3.0L Maximas. $100. + Shipping.
Or arrange for pickup in RI.
I was going to use these as an economical replacement for my rusted out Pre-Cats and Y-Pipe, but got Cattman's.
Fits 1995-2001 / VQ30DE-VQ30DE-K / 3.0L Maximas. $100. + Shipping.
Or arrange for pickup in RI.
I was going to use these as an economical replacement for my rusted out Pre-Cats and Y-Pipe, but got Cattman's.
Last edited by BobPezz; 11-24-2011 at 04:04 PM.
#3
Nope just did some reasearch will not fit a 3.5 but these will
http://www.custommaxima.com/product/...s/Default.aspx
http://www.custommaxima.com/product/...s/Default.aspx
#5
I'm not sure, the application is listed for the 4th-5th gen 3L. I wouldn't want to sell them for questionable use on a 5.5 gen 3.5L. Then have the buyer be upset if they didn't fit. No offense, but I suggest you look at other options.
#6
Nope just did some reasearch will not fit a 3.5 but these will
http://www.custommaxima.com/product/...s/Default.aspx
http://www.custommaxima.com/product/...s/Default.aspx
Nissan Maxima Exhaust CustomMaxima Performance Racing Headers High Quality at Affordable Prices
Get a step up on your competition with a set of CustomMaxima Headers
$209.99 $349.99 You save 40%
Up to 15 horse power gain
Direct Bolt-On Fitment
All Hardware Is Included
Stock O2 Sensor Adapters Are Built Into Design
100% T-304 Stainless Steel
Mandrel Bent Tubing
2 inch Inlet and 2.85 inch Outlet
Product Includes 2 Manifolds and Y-Pipe
California Spec. Vehicles Will Require Modifications
If you have more questions about this product, please Contact Us
Note: We have not personally test fitted this year range yet. Can not guarantee fitment. Requires adding an oxygen sensor on inlet on the front manifold.
Last edited by BobPezz; 11-05-2011 at 09:48 PM.
#7
The block is the same so the headers y-pipe will fit together onto the 02-03 just as they would on the 95-01. The only thing is for you 5.5s is that your stock headers/ypipe are set up like the cali-spec 95-01 so you won't be able to just use the y-pipe by itself or the headers by itself but together they will fit and also you may need to have another o2 bung welded in or you can run a o2 sim and be done with it since removing the cats is going to set them off anyway. Now mind you some have reported fitment issues from these while others haven't so its going to depend, but for the price you CAN'T GO WRONG.
#8
The block is the same so the headers y-pipe will fit together onto the 02-03 just as they would on the 95-01. The only thing is for you 5.5s is that your stock headers/ypipe are set up like the cali-spec 95-01 so you won't be able to just use the y-pipe by itself or the headers by itself but together they will fit and also you may need to have another o2 bung welded in or you can run a o2 sim and be done with it since removing the cats is going to set them off anyway. Now mind you some have reported fitment issues from these while others haven't so its going to depend, but for the price you CAN'T GO WRONG.
#11
I have a 4th gen with a 02 3.5 6spd. This setup will bolt up to a 3.5 with no problem. I only took them off cause the weld faild at the flange on the front header. So off they came. Im still using the y pipe connected to stock 3.0 headers on a 02 3.5. I wouldnt worry so much as IF they will fit, cause they will. My only concern is how long will they last before they deside to fail. Then again they may not.
#12
#13
I have a 4th gen with a 02 3.5 6spd. This setup will bolt up to a 3.5 with no problem. I only took them off cause the weld faild at the flange on the front header. So off they came. Im still using the y pipe connected to stock 3.0 headers on a 02 3.5. I wouldnt worry so much as IF they will fit, cause they will. My only concern is how long will they last before they deside to fail. Then again they may not.
#15
#18
First buyer to pay $100. + shipping, gets them. Please PM Me with a serious offer only. I've answered lots of PMs/questions and gone through the trouble of getting shipping quotes on several bites. But no one has committed to a buy yet.
Thread
Thread Starter
Forum
Replies
Last Post
KabirUTA13
5th Generation Classifieds (2000-2003)
19
10-17-2015 02:15 AM