jayeyeMax

i just recently needed to replace my clutch.
i ordered the oem 4th gen pressure plate
the 5th gen clutch disc
and going to resurface my flywheel

i also ordered the ss one piece clutch line from the master to the slave.

i cant seem to find any info on how to install these items.
pictures would help 100%

maxgtr2000

iTrader: (29)

I just did all of the above. I have not seen a write up on the ss line but if you search for clutch line you will see a pic. You will have to remove 2 lines when you do the clutch line replacement. There is a write up in the how to section on how to pull the tranny. When you replace the clutch make sure you torque the pressure plate bolts to spec.

beegeezy

iTrader: (3)

http://www.nicoclub.com/FSM/maxima/1995/cl.pdf

I think you have that backwards. Don't you want a 4th gen (or 5th gen) clutch disc with a 5th gen (20th Anniversary?) pressure plate?

jayeyeMax

i hope thats not true i just ordered a 5th gen clutch disc and a 4th gen pressure plate

beegeezy

iTrader: (3)

If you were trying to get a clutch that handles more power, then yes, I believe it's true. IIRC, the 5th gen 20AE pressure plate is sprung more heavily, which gives the clutch more power holding capability. The discs are the same and so are the non-AE pressure plates between all 4th and 5th gen Maximas.

jayeyeMax

so basically i just ordered a oem 4th gen setup im not mad i just want it to work. will it work?

thanks for the info guys but were can i buy the 20th ae 5th gen pressure plate

cashoit

LukeGxe did a writeup on the SS lines

aackshun

iTrader: (3)

http://aackshunsgarage.blogspot.com/...utch-line.html

beegeezy

iTrader: (3)

Yeah, pretty much. It should work fine.